dB Technologies VIO S218

( 0 Reviews )
Rs. 755,244.00 Rs. 717,440.00

Inclusive of all GST

As a default, VIO S218 is equipped with dBTechnologies RD-Net card, for real time remote control via Aurora Net software.
Furthermore, the preamplifier is ready for future upgrades with Audinate DanteTM AoIP protocol. To help users in this configuration, S218 comes with built-in technologies: Near Field Communication (NFC™) proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize, identify and match each box physical position on the remote control software Aurora Net.
The amp also allows users to run auto-test on electronics and transducers before and after use and a real time impedance control. This unique system ensure tour-grade reliability and remote control over your entire PA’s health.

 

Details

TECHNICAL
SPECIFICATIONS

TECHNICAL DATA

Speaker Type

Active Bassreflex subwoofer

ACOUSTICAL DATA

Frequency Response [- 10 dB]

27 Hz (HPF)

Frequency Response [- 6 dB]

28 Hz to cut frequency (Xover dependent)

Max SPL

143 dB

LF

2x18” Neodymium

Voice Coil LF

4”

Directivity

Omnidirectional

AMPLIFIER

Amplifier

3200 W RMS [2x 1600 W RMS Class-D Digipro® G4] 

Cooling

Passive convection, internal fan

Power Supply

Full-range SMPS with PFC (100V~-240V~, 50-60Hz)

PROCESSOR

Controller

DSP 32 bit

AD/DA Converter

24 bit/96 kHz

Limiter

Peak, RMS, Thermal

Delay Option

0 - 9.9 ms internal | steps of 0.1 ms [on-board]

Crossover Frequency LF-HF

Selectable 60-110 Hz + Full Range (8 steps)

LF-Xover out slope

24 dB/Octave

INPUT

Signal Input

1 x XLR balanced, 1 x RJ45 Link (RDNet)

Signal Output

1x XLR balanced, 1 x RJ45 Link (RDNet)

Power Socket

1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out

Controls

1x Input Attenuation Rotary Encoder
2x Delay Rotary Encoder (0-9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid mode Switch
1x X-Over Frequency Rotary Encoder (8 steps)

Special Features

NFCTM and Frontal LED Identification System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
System Test (transducers diagnostics)

MECHANICS

Housing

Multiplex plywood - Polyurea painting

Handles

4x Side. Aluminium

Raincover

Included

Rigging Points

2x Pick Points on top for DRK-210 rigging frame

Width

1300 mm (51.18 in)

Height

520 mm (20.47 in)

Depth

800 mm (31.5 in)

Weight

85.6 kg (188.72 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Add to Cart Add to Wishlist